Mould Remover!

...for the removal of damp mould, black mould, mould spores

Mildew: Formation and Remedy - Mould fungi are micro organisms that multiply through spores. They are invisible but present in the air and can settle everywhere. They prefer a Damp, Warm Organic surrounding.

There are two main reasons for interior mildew settlement:

• Constructional defects like damage by water, new buildings not completely dried through, or cracks in the brickwork.
   

• Inappropriate room ventilation and heating, especially houses that are built hermetical to save energy, with inadequate air-exchanges between rooms.

In either case, it is very important to find and eliminate the
cause of infestation to prevent future mildew formation.

Mildew Removed: Now what? - Substrates prone to mildew formation; where the surface is now dry, can be recoated with a prophylactic application of 412 Mould Remover, which should be allowed to dry fully before repainting.

Prevention

• Keep relative air-humidity at approximately 50%
   

• Cross-ventilate rooms 3-4 times each day.
   

  • 5-10 minutes November through March
     

  • 10-25 minutes, April through October
     

  • It is not recommended to constantly air the room by keeping a window slightly open.
    
    

• Ventilation in basements: Keep doors and windows shut during the Summer. During the Winter , only ventilate basements if the exterior temperature is below that of the interior wall.
  
  
• Use controlled air conditioning (dehumidifier) as appropriate
  
  
• Increased humidity in bathrooms or Kitchens should be balanced by immediate ventilation e.g. extractor fans
  
  
• Do not dry cloths indoors
  
  
• Leave a 5cm gap between furniture and outer walls
  
  
• Use construction material and wall coatings that leave walls open to diffusion e.g. micro porous paints which allow rooms to breath

Application

• Spray on, and wait 15 minutes for reaction
   

• Wipe off with a damp cloth
   

• On smooth surfaces e.g. plastics, tiles: once mould has been removed, wipe surface clean again with a damp cloth and clean water
   

• On porous surfaces e.g. Wallpaper: once mould has been removed, and the surface cleaned, spray again and allow to dry

Composition - Water, borates, tensides from rape oil, castor oil and sugar surfactants. Current full declaration is definitive. Although containing natural substances, do not use if allergic to contents